HI3843

Hypochlorite Chemical Test Kit

$99.99

The HI3843 is a chemical test kit that measures hypochlorite by iodometric titration. The HI3843 is supplied complete with all of the reagents and equipment necessary to perform approximately 100 tests.

Pre-made reagents for ease of use
All reagents marked with expiration date and lot number for traceability
Manual titration performed with color indicator

*Products classified as Dangerous Goods can only be shipped via ground.

This product is classified as a Dangerous Good

Learn More

Thank you for your interest in our products. A representative will contact you within the next business day.

The HI3843 is a titration-based chemical test kit that determines the hypochlorite concentration within the 50 to 150 g/L Cl₂ range. The HI3843 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 100 tests.

Features at-a-glance

Complete setup

All required materials are included with the test kit, such as the Erlenmeyer flask, indicator and reagent bottles and packets, and plastic pipettes.

High resolution

Readings from 50 to 150 g/L are determined to 5 g/L (0.5%) resolution.

Replacement reagents available

There is no need to buy a new kit when reagents are exhausted. The HI3843-100 can be ordered to replace the reagents supplied with the kit.

Significance of Use

Hypochlorites are common bleaching agents used to whiten textiles and paper and to disinfect solutions. Sodium hypochlorite solution has been traditionally used for the treatment of pool water since it is an inexpensive and readily available form of chlorine. The solution usually contains 10 to 15% available chlorine (equivalent to 100 to 150 g/L), but it rapidly loses its strength during storage. In addition, since it is greatly affected by heat, light, pH, and heavy metals, it needs to be monitored regularly.

An iodometric titration method is used in the HI3843 test kit. The hypochlorite solution is treated with potassium iodide and strongly acidified with acid (Step 1). The amount of iodine generated is equivalent to the chlorine in the sample. The concentration of iodine is then calculated by titration of thiosulfate ions that reduce the iodine back to iodide ions (Step 2).

Step 1: OCl^- + 2H⁺ + 2I^- → Cl^- + I₂ + H₂O

Step 2: I₂ + 2(S₂O₃)^2- → 2I^- + (S₄O₆)^2-

Resources

Specifications

Specification Name	Detail
SKU	HI3843
Type	titration
Smallest Increment	5 g/L (ppt)
Method	iodometric
Number of Tests	100 avg
Ordering Information	HI3843 test kit comes with 30 mL potassium iodide solution, 100 packets bleach reagent B, 60 mL bleach reagent C (2), 125 mL glass Erlenmeyer flask and 1 mL plastic pipettes (25).
Reagent	HI3843-100
Hypochlorite Range	50-150 g/L (ppt)
Proposition 65	WARNING: This product can expose you to chemicals including Ethylene glycol (ingested), which is known to the State of California to cause birth defects or other reproductive harm.

Product Manuals

ISTR3843_05_13 Download