Pool Checktemp® Dip Digital Thermometer

The Checktemp Digital Thermometer is a high-accuracy NTC thermistor thermometer connected to a weighted, stainless steel probe by a 3 m (9.9’) flexible, silicone cable.

The weighted, stainless steel probe is designed to measure temperature in swimming pools and hot tubs. Attached to the meter by 3 m of cable, the probe is capable of taking temperature readings at various depths. The probe is made of AISI 316 stainless steel, which makes it easy to clean.

The HI985394 Pool Line Digital Thermometer is equipped with Hanna’s exclusive CAL Check^® feature for reliable and accurate measurements. CAL Check automatically runs a self-check upon startup and looks for any drift in the internal electronics. The thermometer then reports the instruments status back to the user in a matter of seconds; 0 for ok and Err if something is wrong.

Features at-a-glance:

• AISI 316 stainless steel weighted probe
• ±0.3°C (±0.5°F) Accuracy
• CAL Check™ - Automatically verifies calibration at startup
• °C/°F readout – User selectable
• IP 65 water resistant protection
• User-selectable auto-off (select from 8 min., 60 min., or disable)