Mini Conductivity Controller (0 - 1999 μS/cm)

BL983313-1

Mini Conductivity Controller (0 - 1999 μS/cm)

$220.00

The BL983313 is a compact, panel mounted, process controller for measuring electrolytic conductivity (EC) of a process stream that is within the 0 to 1999 μS/cm range. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a dosing pump or a solenoid that controls a valve.

Multicolor LED Indicator
Fire Retardant Casing
Fire Retardant Casing

Learn More

Thank you for your interest in our products. A representative will contact you within the next business day.

mini-conductivity-controller-bl983313-angle

Adjustable Dry Contact Dosing Relay

The BL983313 features a dosing relay that is activated when the reading is above a user programmable set point.

Programmable Overdose Protection

For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled.

Relay Control Override

With the flick of a switch the mini controller's relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.

Multicolor LED Indicator

Multicolor LED indicator allows an operator to quickly check the status of the controller.

Green = Meter in measurement mode and reading is below the set point.
Orange/Yellow = Reading is above the set point and the relay is active.
Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded.

mini-conductivity-controller-bl983313-rear

Fuse Protected Dosing Contacts

The relay dosing contact is rated for up to a 2A load and is fuse protected.

Labeled Termination Connections

Quick-connect terminal blocks are clearly labeled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light.

male-threaded-amperometric-probe-hi7634

1/2" NPT Male Threaded Amperometric Probe for Mounting In-line*

The BL983313 mini controller uses the HI7634-00 conductivity probe that is available with different cable lengths.

*HI7634-00 is not included and must be ordered separately