HI83300-11

CAL Check™ Cuvette Kit for HI83300

$169.99

The HI83300-11 CAL Check^TM Standards provides a simple solution to calibrating and validating the HI83300 Multiparameter Benchtop Photometer and pH meter. This high quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values and expiration date for traceability when certifying the copper high range photometer.

Absorbance values at 420nm, 466nm, 525nm, 610nm, and zero
Supplied with Certificate of Analysis
Reusable with long shelf life stability

*Products classified as Dangerous Goods can only be shipped via ground.

This product is classified as a Dangerous Good

Learn More

Thank you for your interest in our products. A representative will contact you within the next business day.

HI83300-11 is a high quality set of calibration standards that allows users to validate absorbance measurements using certified CAL Check^TM Standards. The HI83300-11 includes six sealed cuvettes, including one for zeroing the meter. The calibration set is produced in our state-of-the-art manufacturing facility using reagent grade chemicals in a temperature controlled environment.

Supplied with certificate of analysis

Lot number
Expiration date
Standard value @ 25°C
Reference meter NIST traceable

Provided storage containers

Light tight
Protects from accidental breakage

Validation of the HI83300 Multiparameter Benchtop Photometer and pH meter is quick and easy with the CAL Check^TM Standards. The “CAL Check^TM” screen guides the user through the measurement of each CAL Check^TM Standard and applies the factory calibration corrections to each measurement. The HI83300 stores the results of the most recent CAL Check^TM measurements which may be viewed on the “CAL Check^TM” screen. Compare these results with the values printed on the Certificate provided with each HANNA^® CAL Check^TM Standards kit.

To perform a validation:

1. Press Setup button.

2. Highlight CAL Check^TM, then press Select.

3. Follow the prompts on the screen. The meter will prompt to measure each cuvette provided in the HANNA^® CAL Check^TM Standards kit.

You are now ready to measure.

CAL Check™ Cuvette Kit for HI83300

Supplied with certificate of analysis

Provided storage containers

Keep extra testing supplies on-hand

CAL Check Cuvette Kit for HI83300 - HI83300-11 Reviews