ISE Slope Check Buffers with Chloride Background

HI4000-47

ISE Slope Check Buffers with Chloride Background

$84.99

HI4000-47 is a set of pH 4 and pH 7 buffer packets (includes 10 packets of each buffer). These buffer packets contain chloride ions to allow an inner electrode check of the ammonia and carbon dioxide ion selective electrodes. The ammonia and carbon dioxide sensors are both gas sensing, combination ion selective electrodes (ISEs) that contain an internal glass pH element to determine ammonia and carbon dioxide concentrations, respectively. An inner electrode check with the HI4000-47 buffers ensures the pH element is in working condition, permitting accurate ISE measurements.

Prepared with high purity chemicals
Pre-measured buffers for ease of use
Clearly marked lot number and expiration date

Learn More

Thank you for your interest in our products. A representative will contact you within the next business day.

HI4000-47 is a package containing pH 4 and pH 7 buffer packets with chloride ions and two plastic beakers. The special pH 4 and pH 7 buffers have a chloride background to verify the inner pH glass assembly housed within the ammonia and carbon dioxide gas sensing ISEs.

Before assembling an ammonia or carbon dioxide ISE for the first time, or if reactivating after storage, the inner glass assembly should be conditioned and tested as a pH electrode. The pH buffer packets can be added to 50 mL of deionized or distilled water and the sensor assembly carefully immersed in solution. When the mV measurement in each buffer solution is stable and recorded, the mV difference can be calculated. A calculated mV difference equal or greater than 160 mV is acceptable for temperatures between 20 and 25°C.

Keep extra testing supplies on-hand

HI4001-45 Ammonia ISE Conditioning and Storage Solution $79.99

HI740159 Plastic Tweezers $18.99

ISE Slope Check Buffers with Chloride Background

Keep extra testing supplies on-hand

ISE Slope Check Buffers with Chloride Background - HI4000-47 Reviews