Prep your lab now. Ensure your testing success with our portable and benchtop meters - SHOP ALL
HI84530-55U
Pump Calibration Standard for Titratable Acidity in Water Mini Titrator
MSRP:
Was:
Now:
$39.99
(You save)
The HI84530-55U is a 230 mL bottle of pump calibration solution that is used to calibrate the dosing system of the HI84530 Titratable Acidity for Water Analysis. A calibrated dosing pump allows for the accurate determination of the amount of titrant used when performing a titration. The amount of volume dosed along with the concentration of the titrant is used by the pre-programmed formula within the HI84530 in determining the exact titratable acidity. The pump calibration procedure should be performed anytime the titrant or pH electrode is replaced. Routine calibration is recommended to ensure the highest of accuracy when performing a titration.
Pre-standardized solution
Clearly marked expiration date and lot number
Air tight bottle with tamper-proof seal to ensure quality
*Products classified as Dangerous Goods can only be shipped via ground.
The HI84530-55U is a 230 mL bottle of pump calibration standard solution that is used for both low and high range determination of acidity in water.
Titratable acidity in waters, as performed on the HI84530 mini titrator, utilizes a simple sample preparation, a high quality titrant dosing pump, potentiometric endpoint detector, and automatic computations. To maintain the high precision of the titrator, a simple pump calibration procedure is required. A change of measurement range requires a different titrant along with a pump recalibration. The pump calibration involves the analysis of a known volume of a known solution and compensates for changes in pump dosing that may occur due to many factors including tube stretching or aging. This procedure should be performed regularly with the HI84530-55U pump calibration solution to accurately determine acidity levels in water.
Replacement reagents required to operate the HI84530 include:
Low Range - 15 to 400 mg/L as CaCO3
High Range - 300 to 4000 mg/L as CaCO3
Pump calibration standard
HI84530-55
HI84530-55
Titrant solution
HI84530-50
HI84530-51
Hydrogen peroxide reagent*
HI84530-60
HI84530-60
* Used with samples containing hydrolyzable salts or polyvalent cations (such as chromium, iron, manganese)