pH Electrode for Direct Soil Measurement

HI1292D

pH Electrode for Direct Soil Measurement

$229.99

The HI1292D is a glass body, refillable, single junction pH electrode with a DIN connector. This electrode has a triple ceramic junction in the outer reference cell and the conic pH sensing tip is made with low temperature glass. There is an integrated amplifier and built-in temperature sensor for automatically temperature compensated pH readings. The design consideration for the HI1292D is ideal for pH measurements in soils and soil slurries. The HI1292D is designed for use with Hanna's HI99121 portable pH meter.

Triple Ceramic Junction
Low Temperature Glass
Built-in Temperature Sensor

*Products classified as Dangerous Goods can only be shipped via ground.

Learn More

Thank you for your interest in our products. A representative will contact you within the next business day.

Hanna Instruments offers a wide variety of pH electrodes that are designed for many different applications. The type of glass used for sensing pH, bulb shape, body material, type of junction, type of reference and electrolyte used are just some of the design considerations.

The HI1292D uses low temperature (LT) glass, conic bulb, glass body, triple ceramic junction, and is refillable with 3.5M KCl + AgCl (HI7071M).

Low-Temperature Glass Formulation

The glass tip uses a special LT glass formulation with a lower resistance of approximately 50 megaohms compared to general purpose (GP) with a resistance of about 100 megaohms. As the temperature of the glass decreases when in a sample at low temperature, the resistance of the LT glass will increase approaching that of GP glass at ambient temperatures. If using GP glass, the resistance would increase above the optimum resistance for the high impedance input of a pH meter. The HI1292D is suitable to use with samples that measure from -5 to 70C.

Conic Bulb

The conical shaped tip design allows for penetration into solids, semi-solids, and emulsions. The HI1292D is ideal for the direct measurement of pH in soils and soil slurries.

Glass Body

The glass of the HI1292D is resistant to many harsh chemicals and is easily cleaned. The glass body also allows for a fast transfer of heat to the internal reference electrolyte. The mV generated by the reference cell is temperature dependent. The faster the equilibrium the steadier the reference potential.

Triple Ceramic Junction

The triple ceramic junction allows a higher flow rate of electrolyte from the reference cell into the measurement sample. A typical pH electrode will have a single ceramic junction that flow rate of 15 to 20 µL/hour. The HI1292D has three ceramic junctions in contact with the sample providing for a flow rate of 40 to 50 µL/hour. The increased flow provides a greater continuity between the reference electrode and the indicating electrode.

Refillable

The HI1292D is a refillable probe. Since it is a single junction pH electrode the fill solution is the HI7071M 3.5M KCl + AgCl. If using a refillable pH electrode, the fill cap should be removed prior to calibration and measurement. Removing the cap creates positive head pressure in the reference cell allowing for a higher flow rate of electrolyte through the outer junction. A higher flow rate will result in a faster and more stable reading.

DIN Connector

The HI1292D has a DIN connector that can be used with the HI99121 portable pH/temperature meter for direct pH measurement in soil.

Keep extra testing supplies on-hand

HI547-11PB General pH Calibration Bundle, pH 4 & 7 (Bottles) $77.99

HI5710-11PB General pH Calibration Bundle, pH 7 & 10 (Bottles) $77.99

HI64710-11 Laboratory Calibration Bundle $154.99

HI54710-11 pH 4.01, 7.01 and 10.01 Technical Calibration Solutions with Electrode Storage Solution and Cleaning Solution (5 x 500 mL) $119.99

HI740244 pH Protective Green Sleeves (3 pcs.) $32.99

HI740245 pH Protective White Sleeves (3 pcs.) $32.99

Resources

Specifications

Specification Name	Detail
SKU	HI1292D
Reference	single, Ag/AgCl
Junction / Flow Rate	cermic, single / 15-20µL/hr
Electrolyte	3.5M KCl + AgCl
Range	pH: 0 to 12
Recommended Operating Temperature	-5 to 70˚C (23 to 158˚F)
Tip / Shape	conic (12 x 12 mm)
Diameter	12 mm
Body Length	120 mm / 175.5 mm
Temperature Sensor	yes
Matching Pin	no
Amplifier	yes
Body Material	glass
Cable	7-pole; 1 m (3.3')
Recommended Use	direct soil pH measurement, soil samples, soil solution
Connection	DIN